Klinker Range
Floor & Paving Tile
Designed for commercial
to light industrial applications.
“As tough as they come!”
Standard Colors

Lava

Cloud

Bronze

Adobe

Ebony

Heather

Kistin

Klinker
floor & paving tile from Norco is an unglazed, homogeneous, extruded tile which has been designed and manufactured to combine pleasing appearance with superior technical characteristics. It has been developed with specific emphasis on chemical resistance and performance in high foot traffic areas.


Technical specifications begin with an all-important Water Absorption rating of 3% or less. Norco Klinker tile passes all international standards for acid-resistant floor tile. It is fade-proof, fire-proof, dent proof; and is resistant to oils, acids, detergents, chemicals, frost, mould and salt attack.


Ideal for commercial and light-industrial applications they are well suited for use in commercial kitchens, restaurants, shopping centers, pathways, factories, railway stations, sports stadiums, commercial swimming pools and food processing plants where their natural slip resistant, tough, unglazed surface allows easy maintenance.






Screen may not show colors accurately. For final color
selection please refer to current actual tile sample.


SLIP resistant (R11)    •    FROST resistant    •    STAIN resistant    •    ACID resistant
CarbGrip Surface
The CarbGrip surface, on any size or color (other than 300 x 300 mm), is achieved by impregnating the standard tile surface with carborundum (silicon carbide) during the manufacturing process.

The result is an increase in slip resistance from the standard R11 to R13, an increase in wear resistance, and an increase in liquid displacement to minimum V4. 


      200 x 200 mm
       Close-up     
Main Technical Properties (range average)
See complete technical
Specifications of this
product range.
Water Absorption (ISO 10545 - 3)
Scratch Hardness (BS 6431 Part 13)
Frost Resistance (ISO 10545 – 12)
Salt Safe (AS1226.10)
Chemical Resistance (ISO10545.13)
Slip Resistance (Oil-Wet Ramp Test to SS 485-2001)
≤ 3%
MOH’s 7
Pass
Pass
Pass
R11
Standard Sizes (mm)
DESIGNERS: Please inquire
about Custom Made sizes.
Standard Accessories (profiles)
See Architectural Details
of these accessories.
IMPORTANT INSTALLATION POINTS
The following points must be observed to achieve the best aesthetic and technical floor or paving result:
1.  During installation take tiles randomly from two or three packs.
2.  Follow the recommended grout gaps shown on the label of the tile pack.
3.  When installing square tiles ensure that underside fixing ribs are running in the same direction whenever possible.
4. 
Flexible 10 mm expansion joints should be installed along restrained perimeters of the installed area, around rigid interruptions, above substrate construction joints, and every 4 to 5 meters across any continuous expanse of floor or paving; or follow local standards when available.