| Facade Range |
| Wall Cladding Tile |
Designed for residential
and commercial applications. |
“Natural and durable?....Yes!” |
|
|
|
|
Facade Range wall cladding tile from Norco is made using 100% natural blended clays and minerals. The result is traditional brick aesthetics, extraordinary durability, and dimensional accuracy. The durability of this wall surface will cope with graffiti removal procedures without affecting it’s enduring good looks.
The BrickClad Series and the FlashClad Series carry all the visual and technical qualities of their QuarryPave and QuarryFlash counterparts, and will provide a long lasting, low maintenance, elegant surface for internal or external walls, fences, and facades.
The Heritage BrickClad Series offers a variety of rustic pre-20th century brick colors and a choice of two surface textures. Surface flatness and straightness of sides have been intentionally compromised to lend authenticity to the replication of antique bricks. Therefore, some of the ISO 13006:1998(E) dimensional standards have been ignored during the manufacturing process.
CLICK ON THE THUMBNAIL IMAGES BELOW FOR MORE DETAIL OF COLORS AND TEXTURES.
|
|
Standard Colors |
|
BrickClad Series |
FlashClad Series |
Heritage BrickClad Series |
|
Chestnut
|
Mocha
|
Pinot
|
Firenze
|
Isola
|
Latte
|
Brezza
|
Sirocco
|
|
Pinot Flash
|
Riviera Saltillo
|
Heather Blend
|
Costa Brava
|
|
Armagh |
Lincoln |
Zurich |
Cadiz |
Marseille |
|
|
Screen may not show colors accurately. For final color selection please refer to current actual tile sample.
GRAFFITI resistant • FROST resistant • STAIN resistant • SALT resistant |
| Main Technical Properties |
(range average) |
|
See complete technical
Specifications of this
product range.
|
Water Absorption (ISO 10545 - 3)
Scratch Hardness (BS 6431 Part 13)
Frost Resistance (ISO 10545 – 12)
Salt Safe (AS1226.10)
Chemical Resistance (ISO10545.13) |
≤ 6%
MOH’s 6
Pass
Pass
Pass |
|
|
|
|
IMPORTANT INSTALLATION POINTS
The following points must be observed to achieve the best looking floor or paving result:
| 1. |
During installation take tiles randomly from two or three packs. |
| 2. |
Follow the recommended grout gaps shown on the label of the tile pack. |
| 3. |
Flexible expansion joints should be installed every 4 to 5 meters across any continuous expanse of installation; or follow local standards when available.
|
|
